192.168.1.1 is the most common default gateway address in the world — the admin login for routers from TP-Link, Netgear, Linksys, Asus, D-Link and many ISPs. Use the tool below to open it, then find your default login and change the settings you came for.
Tip: your router must be on this network. If the page does not load, try the other common IPs below.
How to log in to 192.168.1.1
- Connect to the router by WiFi or cable. You don’t need internet access — you just need to be on the router’s own network.
- Open the address with the button above, or type
192.168.1.1into your browser bar. - Enter the admin username and password. If you never changed them, use the factory defaults — tap “Show default logins” in the tool above for the table.
- You’re in. From here you can change your WiFi name and password, update firmware, set up port forwarding or restart the router.
Default logins by brand
| Brand | Username | Password |
|---|---|---|
| TP-Link | admin | admin |
| Netgear | admin | password |
| Linksys | admin | admin |
| Asus | admin | admin |
| D-Link | admin | (leave blank) or admin |
The full list, plus what to do when defaults fail, is on our Router Default Passwords page.
192.168.1.1 not loading? The fixes
- Check your router actually uses this IP. Many use 192.168.0.1 Router Login or 10.0.0.1 instead. The correct address is printed on a sticker on the router.
- Remove “www” and “https”. Type just
192.168.1.1. Adding www or forcing https often fails on local routers. - Disable mobile data / VPN. Both can route your request away from the local router.
- Try incognito to rule out a cached or half-loaded admin page.
- Confirm you’re not on a guest network, which usually blocks admin access by design.
What you can change once you’re in
The admin panel is where you rename your WiFi, set a stronger password, create a guest network, update firmware (important for security), forward ports for gaming or servers, and see which devices are connected. If the panel looks unfamiliar, that’s normal — every brand designs its own, but the core settings live under similar menu names (Wireless, Security, Advanced).
What is the username and password for 192.168.1.1?
It depends on your router brand. TP-Link, Linksys and Asus commonly use admin/admin; Netgear uses admin/password. If those fail, someone changed them — check the sticker on the router or reset it.
Why can't I access 192.168.1.1?
Usually your router uses a different IP (192.168.0.1 or 10.0.0.1), or a VPN/mobile data is intercepting the request. Check the sticker on the router for the correct address and disable any VPN.
How do I change my WiFi password at 192.168.1.1?
Log in, open the Wireless or WiFi Settings section, find the password (sometimes called the network key or passphrase), enter a new one and save. Your devices will need to reconnect with the new password.
Is 192.168.1.1 safe to open?
Yes — it’s a private local address that only reaches your own router. It’s never a public website, so you can’t be phished by opening it, as long as you typed the numbers yourself.
I forgot my router admin password. What now?
Reset the router to factory defaults using the recessed pinhole button (hold ~10 seconds). The default login then works again — but you’ll need to set up your WiFi from scratch.